Jetport 5601f is a RS232/422/485 to Fiber Ethernet serial server. The serial interface is configured in software and supports speed as high as 460.8kbps. The fiber port supports one multi-mode fiber SC port, with max. 2KM communication distance, or single-mode fiber SC port, with max. 30KM distance.
JetPort 5601f can be configured by JetPort Commander, an easy-to-use utility for Windows that covers all management, monitoring, and control functions for one or many JetPort servers. In addition to Windows configuration, JetPort can be configured by Web and Telnet, giving administrators the flexibility for device management. JetPort 5601f supports HTTPS and SSH for secured management data. JetPort 5601f can be wall mounted or din-rail mounted by the din-rail kit.

Fiber Optic for Hazardous Applications and Long Distance
The fiber Ethernet allows higher communication bandwidth and provide total immunity against EMI/RFI interferences and increased security. In addition, the Fiber serial server can be used without risk in hazardous applications with no EMC emission, no ground loops, and immunity against lightning and high voltage environments. For long distance applications, the single-mode fiber supports 30KM transmission distance and multi-mode 2KM.

RS232/422/485 3-in-1 Serial Configuration
JetPort serial port supports RS232, RS422, 2/4 wire RS485 and is configured by software. The serial speed can be set as high as 460.8kbps for RS232, RS422, and RS485. The serial port can work in various communication modes, including virtual com, TCP server, TCP client, UDP, and serial tunnel. Advanced
settings for controlling the data communications such as TCP alive check, delimiter, and timeout are also supported. For industrial redundant solutions, JetPort supports to maximum 5 simultaneous connections for virtual com, TCP server, TCP client modes, sending data to 5 hosts simultaneously.

JetPort 5604 series is a 4-port Serial to Redundant Ethernet Device Server, each serial port supporting 3-in-1 RS232/422/485 serial interfaces. JetPort 5604i provides 4 RS422/485 serial interfaces with 2KV optical isolation protection. You can use one IP address, dual redundant paths to control maximum 4 serial devices over the Ethernet. The data throughtput can be also reached to high performance 460.8 Kbps for each serial port. You can configure the devices as Virtual COM, TCP Server, TCP Client, or UDP modes. The JetPort 5604 series also equipped with 2 types of redundant power inputs, 4 Digital Inputs and 2 Digital Outputs. The JetPort 5604 series can be configured by JetPort Commander, the easy-to-use Windows utility which supports device discovery, device configuration, multiple device setup wizard and monitoring, and the HTTPS and SSH for high secured management. The Notification includes the Email alert, System log, SNMP traps and Digital Output for pre-defined events. The applications can be most suitable for remote gas pump controls in gas station, control & monitor field sensors network in industrial automation, automatic warehouse control systems, remote and distributed serial device control systems.

 4 serial interfaces can be configured for different mode

The JetPort 5604 has 4 ports 3-in-1 RS232/422/485 serial ports. JetPort 5604i provides 4 RS422/485 serial interfaces with 2KV isolation protection. All of the ports can be configured with different serial interface types, like RS232, RS422, 2-wire RS485 or 4-wire RS485. Each of the port also can be configured with different service modes. You can configure serial port-#1 to Virtual COM mode, serial port-#2 to TCP server, serial port-#3 to TCP client and serial port-#4 to UDP mode. All of the serial ports have their own settings and can work well at the same time.

Equipped Digital I/O Controls to remotely supervise and configure industrial applications

The JetPort 5604 system can use the 4 digital inputs, 2 digital outputs to determine the state of limit or safety switches or to receive remote digital signals from connected device in the industrial fields. It allows users to connect the termination units’ 5V TTL digital input/output. JetPort also provides one data port for user to program DI/O via get and set commands.

High Voltage 2KV Optical Isolation Protection

JetPort 5604i equipped with 2KV optical isolation protection and 15KV ESD surge protection of serial interfaces. Optical isolation solves the problem of ground looping which can severely garble communications, by effectively lifting the connection between the serial data line and "ground" at either end of the serial networking line.