Ethernet IndustrielRESoluCOM Site en Anglais

Accueil| Carte du site | Bas page

Commutateurs (Switch) industriels Ethernet

JetNet Série 3000

Switch Ethernet Gigabit non configurable

Solution Gigabit pour switch industriel Ethernet non configurable

 

Switch industriel Ethernet d'entrée de gamme, non configurable

Solution économique pour Ethernet industrielle
  • JetNet 3005 Switch d'entrée de gamme, 5-Ports Ethernet
  • JetNet 3005f, Switch d'entrée de gamme, 5-Ports Ethernet dont 1 port fibre optique
  • JetNet 3008 Switch d'entrée de gamme, 8-Ports Ethernet
  • JetNet 3005-w, Switch haute température, 5-Ports Ethernet
  • JetNet 3005f-mw, Switch haute température, 5-Ports Ethernet dont 1 port fibre optique

Return to the top of the page

 


 

 

 

JetNet 3010/GT

JetNet 3010/GT
Switch Ethernet Gigabit 10-Ports non configurable
JetNet 4005 Indusrial 5-Port Web-Managed Ethernet Switch
  • 7 10/100 Base TX et 3 Gigabit RJ-45/SFP combo,
    (10/100/1000 Base-TX, Gigabit SX/LX)(3010G)
  • 7 10/100 Base TX and 3 10/100/1000 TX (3010GT)
  • Supporte Full/Half-Duplex, auto MDI/MDI-X sur port 10/100TX, Full-Duplex sur port Gigabit
  • 7.4Gbps non-blocking switching performance
  • 8K MAC address auto learning
  • Supporte Alimentations redondantes (12~48VDC,-12~-48VDC)
  • Boitier IP31 en Aluminium rigide
  • Isolation à 2KV pour tous les ports et l'alimentation
  • Température de fonctionnement -10~70℃
  • Montage sur Rail-DIN-Rail, murale ou bureau
Datasheet  
Retour en haut de page

 

Généralité JetNet 3010/GT
 
 
The JetNet 3010G series is an Unmanaged industrial Ethernet Switch. It is equipped 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45 / Gigabit SX/LX SFP combo ports. Or 7 ports 10/100TX and 3 ports 10/100/1000 RJ-45 ports (JetNet 3010GT). To meet industrial environment requirements, features a terminal block to provide wide range power inputs 12-48V and -48V with resverse polarity protection, and the rigid aluminum case design with IP31 standard. Adopting high performance switching architecture to support 7.4G
non-blocking switching performance and up to 8K MAC address auto learning. JetNet 3010G is the best solution to fulfill the increasing demand on industrial Gigabit Ethernet.

Flexible, hot-swappable SFP Transceiver
Gigabit Uplink for high performance requirement
SFP is the abbreviation of the Small Form-factor Pluggable. It is a compact optical transceiver used in optical communications for data communications applications. JetNet 3010G offers 3 10/100/100 RJ-45 or 3 Gigabit SX/LX SFP combo ports. Korenix also recommend many SFP transceivers for your selection. You can connect the 3 ports to the gigabit backbone network or other applications which need wider bandwidth. The JetNet 3010G with SFP module provides better flexibility to connect with various Gigabit interfaces without stocking different types of the fiber switches. For compatible with your existing fiber construction,
you can also find the LC to SC or LC to ST fiber cable in the list of accessory order information.

Korenix SFP Family
Korenix provides 1000Base-SX/LX SFP which meets SFP GBIC standard. The SFP transceivers can be used with any SFP GBIC compliant slot. With 850nm 1000Base-SX Multi-mode SFP , the distance can support up to 550m. With 1310nm 1000Base-LX Single-mode SFP(SFPGLX10), the distance cansupport up to 10KM. You can also select LHX mode for longer distance. The available SFP transceivers are listed in
the accessory order information.
Retour en haut de page

 

Caractéristiques JetNet 3010/GT
Technology
Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3z Gigabit Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports

10/100TX: 7 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100/1000TX: 3 RJ-45 or Combo with SFP
Gigabit Fiber: 3 x Gigabit SFP with Hot-Swapable Function

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m)
100 Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)
1000 Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

Optical Fiber

SFP : Hot-Swapable 1000 Base SX/LX, Single/Multi-mode
1000Base-SX Multi-mode(850nm) transceiver 550m(SFPGSX)
Wave-length: 850nm
Tx Power: -9.5dBm(Min)~-4dBm(Max)
Rx Sensitivity: -18dBm(Max)
Linkbudget: 8.5dBm
1000Base-LX Single-mode(1310nm) transceiver 10KM(SFPGLX10)
Wave-length: 1310nm
Tx Power: -9.5dBm(Min)~-3dBm(Max)
Rx Sensitivity: -20dBm(Max)
Linkbudget: 10.5dBm

LED Indicators

RJ-45 ports: Link/Activity (Green), Full duplex/Collision (Yellow)
Gigabit Ports: Link/Activity (Green)
Power: Power 1 On(Green) / Power 2 On(Green)

Power

2 set of power Input

Performance
Transfer Rate

Wire Speed:14,880 pps for 10M, 148,800 pps for 100M, 1488100 for Gigabit

Transfer Packet Size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

8K MAC address table

Memory Buffer

1Mbits

Back-plane

7.4 Gbps

Power Requirements
Power Supply

Input Voltage: 24 VDC (12~ 48 VDC / -12~-48VDC), Dual Power Inputs
Reverse Polarity Protection: Present

Power Consumption

15 Watts

Mechanical
Installation

DIN-rail kit and wall-mounting ear

Casing

IP-31 protection, aluminum case

Dimensions

96 mm (W) x 137 mm (H) x 119mm (D)

Environmental
Operating Temperature

-10 to 70℃ (14 to 158°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃(-40 to 185°F)

2KV Hi-Pot

for all ports and power

Regulatory Approvals
EMI

FCC Class A, EN55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

MTBF
at least 200000 hours
MIL-HDBK-217F GB (MILITARY HANDBOOK) standard
Warranty
Global 5 years

Retour en haut de page

 

Fourniture JetNet 3010/GT
 
JetNet 3010G Industrial 10-Port Unmanaged Ethernet Switch with 3 Gigabit RJ45/SFP Combo Ports
Includes:
  • 7-ports 10/100Base-TX and 3 10/100/1000 RJ-45/Gigabit SFP Combo ports Switch Quick Installation Guide Documentation CD-ROM
  • Wall mounting plate and six screws
Retour en haut de page

 


JetNet 3005

JetNet 3005
Industrial Entry-Level 5-Port Ethernet Switch
JetNet 4005 Indusrial 5-Port Web-Managed Ethernet Switch
  • Rigid aluminum case design complieswith IP31 standard
  • Supports both full and half-duplex,with auto-negotiation
  • Store-and-Forward switching architecture
  • Supports IEEE 802.3x flow control on full duplex,back pressure on half duplex
  • Provides true non-blocking switching performance
  • DIN-Rail or 3-way wall mounting installation
  • Redundant power inputs
  • Auto MDI/MDI-X on every port
Datasheet  
Retour en haut de page

 

Généralité JetNet 3005
 
 
The JetNet 3005 is a cost-effective 5-port entry-level industrial fiber switch. This 35 mm industrial Ethernet switch not only has all the functions of an unmanaged switch, but also uses a robust aluminum case that offers an IP31 standard protection. To meet industrial device redundancy requirements, JetNet 3005
is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Adapting store-and-forward switching architecture greatly increases the networkefficiency. It delivers true non-blocking switching performance to all ports running at full wire speed without any loss of packets.
Retour en haut de page

 

Caractéristiques JetNet 3005
Technology
Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports

5 x 10/100 Base-TX, Auto MDI/MDIX

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

LED Indicators

Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)

Performance
Transfer Rate

14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port

Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512Kbits

Back-plane

3.2 Gbps

Power Requirements
Power Supply

Input Voltage: 24 VDC(12 to 48 VDC), dual inputs
Reverse Polatiry Protection: Present

Power Consumption

2.0 Watts ( at 24V )

Mechanical
Installation

DIN-Rail kit and wall mounting ears

Casing

IP-30 protection, aluminum case

Dimensions

53 mm (W) x 135 mm (H) x 105mm (D)

Environmental
Operating Temperature

-10 to 70℃ (14 to 158°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃ (-40 to 185°F)

Regulatory Approvals
EMI

FCC Class A, EN55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

MTBF:
448,564 (hours)
* Calculated MTBF is based on MIL-HDBK-217F
(MILITARY HANDBOOK) standard
(This standardization handbook was developed by the US
Department of Defense with the assistance of the military
departments, federal agencies, and industry)
Warranty

Global 5 years

Standard
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
Protocol :
CSMA/CD
Technology:
Store and forward switching architecture
Transfer Rate:
14,880 pps for Ethernet port and 148,800 pps for Fast
Ethernet port
Transfer packet size:
64 bytes to 1522 bytes
MAC Address:
1K MAC address table
Memory Buffer:
512Kbits
Network Cable:
10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable
EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable
EIA/TIA-568 100-ohm (100m)
LED:
Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)
Back-plane:
1.0 Gbps
Number of Ports:
5 x 10/100 Base-TX
Power Supply:
12 to 48 VDC. Redundant power inputs with reverse
polarity protection. A removable terminal block for
master and slave power.
Power Consumption:
2.8 Watts
Installation:
DIN-Rail Kit, or wall mounting ears for 3-way installation
Operating Temperature:
-10°C to 70°C (14°F to 158°F)
Operating Humidity:
5% to 95% (Non-condensing)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Case Dimensions:
IP-31, 53 mm (W) x 135 mm (H) x 105mm (D)
EMI:
FCC Class A, CE EN6100-4-2, CE EN6100-4-3, CE EN-6100-4-4,
Safety:
CE EN6100-4-5, CE EN6100-4-4
UL, cUL, CE/EN60950
Stability testing:
IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock),
IEC60068-2-6 (Vibration)
MTBF:
448,564 (hours) * MIL-HDBK-217F (MILITARY HANDBOOK) standard
Global 5 years

Retour en haut de page

 

Fourniture JetNet 3005
 
JetNet 3005 Industrial Entry-Level 5-port Ethernet Switch includes:
  • 5-port 10/100TX switch Quick Installation Guide Software and Documentation CD-ROM
  • Wall mounting plate and six screws
Retour en haut de page

JetNet 3005f

JetNet 3005f
Industrial Entry-Level 5-Port Etherne Switch w/ One Fiber Port
JetNet 4005f Industrial 5-Port Web-Managed Ethernet Switch
  • Rigid aluminum case design complieswith IP31 standard
  • Supports both full and half-duplex,with auto-negotiation
  • Store-and-Forward switching architecture
  • Supports IEEE 802.3x flow control on full duplex,back pressure on half duplex
  • Provides true non-blocking switching performance
  • DIN-Rail or 3-way wall mounting installation Redundant power inputs
  • Auto MDI/MDI-X on every port
Datasheet  
Retour en haut de page

Généralité JetNet 3005f
 
 
The JetNet 3005f is a cost-effective 5-port entry-level industrial fiber switch. This 35 mm industrial Ethernet switch not only has all the functions of an unmanaged switch, but also uses a robust aluminum case that offers an IP31 standard protection. To meet industrial device redundancy requirements, JetNet 3005f
is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Adapting store-and-forward switching architecture greatly increases the networkefficiency. It delivers true non-blocking switching performance to all ports running at full wire speed without any loss of packets.


Retour en haut de page

Caractéristiques JetNet 3005f
Technology
Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports

4 x 10/100 Base-TX, Auto MDI/MDIX, 1 x 100 Base-FX

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

Optical Cable

SC (Multi Mode): 50/125um to 62.5/125um
SC (Single Mode): 9/125um to 10/125um
Available distance: 2km (Multi Mode) / 30km (Single Mode)
Wavelength: 1310nm (Multi Mode/ Single Mode)

LED Indicators

Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)

Performance
Transfer Rate

14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port

Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512Kbits

Back-plane

3.2 Gbps

Power Requirements
Power Supply

Input Voltage: 24 VDC(12 to 48 VDC), dual inputs
Reverse Polatiry Protection: Present

Power Consumption

3.2 Watts ( at 24V )

Mechanical
Installation

DIN-Rail kit and wall mounting ears

Casing

IP-31 protection, aluminum case

Dimensions

53 mm (W) x 135 mm (H) x 105mm (D)

Environmental
Operating Temperature

-10 to 70℃ (14 to 158°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃ (-40 to 185°F)

Regulatory Approvals
EMI

FCC Class A, EN 55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Warranty

Global 5 years

Retour en haut de page

Fourniture JetNet 3005f
 
JetNet 3005f-m Industrial Entry-Level 5-Port Ethernet Switch with one Multi-Mode 100Base-FX includes:
  • 4 x 10/100 Base-Tx, 1 x Multi Mode 100Base-Fx Quick Installation Guide Software and Documentation CD-ROM Wall mounting plate and six screws

    JetNet 3005f-s Industrial Entry-Level 5-Port Ethernet Switch with one Single Mode 100Base-FX includes:

    4 x 10/100 Base-Tx, 1 x Single Mode 100Base-Fx Quick Installation Guide Software and Documentation CD-ROM
  • Wall mounting plate and six screws
Retour en haut de page


JetNet 3008

JetNet 3008
Industrial Entry-Level 8-Port Ethernet Switch
JetNet 4008 Industrial 8-Port Web-Managed Ethernet Switch
  • Rigid aluminum case design complieswith IP31 standard
  • Supports both full and half-duplex,with auto-negotiation
  • Store-and-Forward switching architecture
  • Supports IEEE 802.3x flow control on full duplex,back pressure on half duplex
  • Provides true non-blocking switching performance
  • DIN-Rail or 3-way wall mounting installation
  • Redundant power inputs
  • Auto MDI/MDI-X on every port
Datasheet  
Retour en haut de page

 

Généralité JetNet 3008
 
 
The JetNet 3008 is a cost-effective 8-port entry-level industrial rail switch. This 35 mm industrial Ethernet switch not only has all the functions of an unmanaged switch, but also uses a robust aluminum case that offers an IP31 standard protection. To meet industrial device redundancy requirements, JetNet 3008 is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Adapting store-andforward switching architecture greatly increases the network efficiency. It delivers true non-blocking switching performance to all ports running at full wire speed without any loss of packets.

Dimensions (unit=mm)
JetNet 3008 Industrial Ethernet Switch Dimensions

Retour en haut de page

Caractéristiques JetNet 3008
Technology
Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports
8 x 10/100 Base-TX, Auto MDI/MDIX
Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

LED Indicators

Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)

Performance
Transfer Rate

14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port
Transfer packet size: 64 bytes to 1522 bytes

Transfer packet size

64 bytes to 1522 bytes(with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512 kbits

Back-plane

1.6 Gbps

Power Requirements
Power Supply
Connection: A removable 6-pin terminal block
Input Voltage

24 VDC(12 to 48 VDC), dual inputs

Reverse Polatiry Protection

Present

Power Consumption

3.9 Watts ( at 24V )

Mechanical
Installation

DIN-Rail kit and wall mounting ears for 3-way installation

Casing

IP-31 protection, aluminum case

Dimensions

53 mm (W) x 135 mm (H) x 105mm (D)

Environmental
Operating Temperature

-10 to 70℃ (14 to 158°F)

Operating Humidity

5% to 95% (Non-condensing)

Regulatory Approvals
EMI

FCC Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

MTBF

453,653 hours * MIL-HDBK-217F (MILITARY HANDBOOK) standard

Warranty

Global 5 years

Retour en haut de page

Fourniture JetNet 3008
 
JetNet 3008 Industrial Entry-Level 8-Port Ethernet Switch Includes:
  • 8-port 10/100TX switch Quick Installation Guide Software and Documentation CD-ROM
  • Wall mounting plate and six screws
Retour en haut de page


JetNet 3005-w

JetNet 3005-w
Industrial 5-Port Entry-Level Wide Temperature Ethernet Switch
JetNet 4008f Industrial 8-Port Web-Managed Ethernet Switch
  • Provides true non-blocking switching performance
  • Store-and-Forward switching architecture
  • Supports Full/Half-Duplex, auto MDI/MDI-X on each port
  • Redundant DC power inputs Rigid aluminum case design complies with IP31 standard
  • DIN-Rail / Wall-Mounting / Desktop installation
  • Industrial-grade operating temperature: -40℃ to 80℃
Datasheet  
Retour en haut de page

Généralité JetNet 3005-w
 
 
JetNet 3005-w is a cost-effective 5-port entry-level industrial Ethernet switch. JetNet 3005w's robust aluminum case complies with IP31 standard protection. To meet industrial device redundancy requirements, JetNet 3005w is equipped with a terminal block to provide dual power inputs with reverse polarity protection.
Adopting store-and-forward switching architecture greatly increases the network efficiency. JetNet 3005-w delivers true non-blocking switching performance to all ports running at full wire speed without any loss of packets. To cope with harsh industrial environments, JetNet 3005w's operating temperature can be as low as -40℃, and as high as 80OC, giving you extra
assurance that your systems can run non-stop.

Retour en haut de page

Caractéristique JetNet 3005-w
 

Technology

Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports
5 x 10/100 Base-TX, Auto MDI/MDIX
Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m)
100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

LED Indicators

Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)

Performance
Transfer Rate
14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port
Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer
512Kbits
Back-plane

1.0 Gbps

Power Requirements
Power Supply
 
Input Voltage

24 VDC(12 to 48 VDC), dual inputs

Reverse Polatiry Protection

Present

Power Consumption

2.0 Watts ( at 24V )

Mechanical
Installation

DIN-Rail kit and wall mounting ears

Casing

IP-31 protection, aluminum case

Dimensions

53 mm (W) x 135 mm (H) x 105mm (D)

Environmental
Operating Temperature

-40 to 80℃ (-40 to 176°F)

 
5% to 95% (Non-condensing)
 

5% to 95% (Non-condensing)

Regulatory Approvals
EMI

FCC Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

MTBF

305,482 hours * MIL-HDBK-217F (MILITARY HANDBOOK) standard

Warranty

Global 5 years

Retour en haut de page

Fourniture JetNet 3005-w
 
JetNet 3505 Industrial 5-Port Unmanaged Redundant Ethernet Switch includes:
  • 5-port 10/100TX switch Quick Installation Guide Software and Documentation CD-ROM
  • Wall mounting plate and six screws
Retour en haut de page

 


JetNet 3005f-mw

JetNet 3005f-mw

Industrial 5-port Entry-Level Wide Temperature Ethernet Fiber Switch

JetNet 4008f Industrial 8-Port Web-Managed Ethernet Switch
  • Provides true non-blocking switching performance
  • Store-and-Forward switching architecture
  • Supports Full/Half-Duplex, auto MDI/MDI-X on each port
  • Redundant DC power inputs
  • Rigid aluminum case design complies with IP31 standard
  • DIN-Rail / Wall-Mounting / Desktop installation
  • Industrial-gradeoperating temperature: -40℃ to 80℃
Datasheet  

Généralité JetNet 3005f-mw
 
 

JetNet 3005f-mw is a cost-effective 5-port entry-level wide temperature industrial Ethernet switch.
JetNet 3005fmw's robust aluminum case complies with IP31 standard protection. JetNet 3005f-mw has four 10/100Base-TX ports and one 100Base-FX port for extending communication distance from 2,000 meters (multi-mode fiber) to 30 Km (single-mode fiber). To meet industrial device redundancy requirements,
JetNet 3005f-mw is equipped with a terminal block to provide dual power inputs with reverse polarity protection. Adopting store-and-forward switching architecture greatly increases the network efficiency.
JetNet 3005f-mw delivers true non-blocking switching performance to all ports running at full wire speed without any loss of packets. To cope with harsh industrial environments, JetNet 3005f-mw's operating temperaturecan be as low as -40℃, and as high as 80℃, giving you extra assurance that your systems can run non-stop.


Caractéristiques JetNet 3005f-mw
 

Technology

Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure

Processing

Store and Forward architecture

Interface
Number of Ports

4 x 10/100 Base-TX, Auto MDI/MDIX, 1 x 100 Base-FX

Network Cable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm (100m)

Optical Cable

SC (Multi Mode): 50/125um to 62.5/125um
SC (Single Mode): 9/125um to 10/125um
Available distance: 2km (Multi Mode) / 30km (Single Mode)
Wavelength: 1310nm (Multi Mode/ Single Mode)

LED Indicators

Per port: Link/Activity (Green), Full duplex/Collision (Green)
Per unit: Power x 3 (Green)

Performance
Transfer Rate

14,880 pps for Ethernet port and 148,800 pps for Fast Ethernet port

Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512Kbits

Back-plane

1.0 Gbps

Power Requirements
Power Supply

Input Voltage: 24 VDC(12 to 48 VDC), dual inputs
Reverse Polatiry Protection: Present

Power Consumption

3.2 Watts ( at 24V )

Mechanical
Installation

DIN-Rail kit and wall mounting ears

Casing

IP-31 protection, aluminum case

Dimensions

53 mm (W) x 135 mm (H) x 105mm (D)

Environmental
Operating Temperature

-40 to 80℃ (40 to 176°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃ (-40 to 185°F)

Regulatory Approvals
EMI

FCC Class A, EN 55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4
EN6100-4-5, EN6100-4-6, EN6100-4-8, EN6100-4-11

Safety
UL, cUL, EN60950
Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Warranty

Global 5 years

Fourniture JetNet 3005f-mw
 
JetNet 3005f-mw Industrial 5-Port Entry-Level Wide Temperature Ethernet Fiber Switch with one Multi-Mode 100Base-FX includes:
  • 4 x 10/100 Base-Tx, 1 x Multi Mode 100Base-Fx Switch Quick Installation Guide Documentation CD-ROM
  • Wall mounting plate and six screws

 

RESoluCOM Logo A Propos de ... | Carte du Site | Infos légales | Nous Contacter |
©2007 RESoluCOM®, Site développé par P Jeannette.