JetNet3700

JetNet Série 3700

Industrial PoE Power Source Ethernet Switch.

24-Port 10/100Mbps + 2-Gigabit-Port Web Smart Ethernet Switch.

JetNet 4724G , 24-Port PoE 10/100Mbps + 2-Gigabit Port Web Smart Ethernet Switch.

Industrial Power Source Ethernet Switchg with 4 PoE 802.3af Port.

JetNet 3705 , Industrial 5-port PoE Power Source Ethernet Switch.
JetNet 3705f , Industrial 5-port PoE Power Source Ethernet Switch.

Retour en haut de page

JetNet 4724G

24-Port PoE 10/100Mbps + 2-Gigabit-Port Web Smart Ethernet Switch

JetNet 4005 Indusrial 5-Port Web-Managed Ethernet Switch

26×10/100/1000Mbps Auto-negotiation Ethernet
RJ45 ports with 24-port PoE function.
Supports PoE power up to 15.4W per PoE port.
Supports PoE power maximum up to 170watts.
for all PoE ports (port 1 ~ port 24).
Store-and-Forward switching scheme capability to support rate adaptation and ensure data integrity.
Supports Port-setting for Speed/Disable, Flow control, QoS.
Easy configuration via WEB Browser.
Easy setting via Web Management Utility.
Standard 19” Rack-mount size.

Généralité

Caractéristiques

Fourniture

Retour en haut de page

Généralité JetNet 4724G

Korenix JetNet 4724G Web Smart PoE Power Source Switch is equipped with (24) 10/100BASE-TX Fast Ethernet ports, all of which support 802.3af Power Over Ethernet (PoE), and two 10/100/1000BASE-T ports for copper Gigabit connections. The JetNet 4724G is a valuable solution for small and medium size
businesses deploying wireless networks, enhanced security, and increasing multimedia applications. This all-in-one solution provides smart management features and Power Over Ethernet to supply power injection into 802.3af compliant devices such as IP phones, wireless access points, and IP cameras. This allows integrators to deliver power to remote devices in locations where a power outlet may not be available or to reduce cabling costs. It also economically integrates Gigabit technology that removes server bottlenecks and speeds up access to the network backbone.

Power over Ethernet 802.3af compliant
The JetNet 4724G has (24) 10/100BASE-TX ports that support 802.3af PoE standard. It is designed to inject up to 15.4 Watts of power per port. Each port can automatically detect if any 802.3af compliant device is attached and supply power which will be automatically adjusted to fit into the device. The JetNet 4724G also supports active circuit protection, which automatically disables a port if there is a short, while the other ports remain active.

Remarkably Smart and Excellent Performance
The JetNet 4724G provides QoS features that are suitable for today multimedia applications. Through a Web-based interface, an administrator can set up 802.1Q VLANs to isolate traffic, 802.1P QoS to prioritize mission-critical data such as voice or video packets, and port-based trunk groups to create wide traffic pipelines. It also provides network monitoring tools such as port mirroring. Through its Web Smart interface,
an administrator can easily facilitate network troubleshooting remotely without going to where the actual
attached device is located. The auto features of this switch make installation plug & play and negotiation hassle-free. The JetNet 4724G also features diagnostic LEDs, which display Link, speed, power, and activity, allowing you to quickly detect and correct problems on the network.

Retour en haut de page

Caractéristiques JetNet 4724G

Technology

Standard

IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Flow Control
IEEE 802.3af Power Over Ethernet
IEEE 802.1p QoS

Interface

Number of Ports

24 x 10/100Mbps, Auto-negotiation, Auto-MDI/MDIX, PoE ports
(port1 ~ port 24)
2 x 10/100/1000Mbps, Auto-negotiation, Auto-MDI/MDIX,
Gigabit Ethernet ports(port25 ~ port 26)

Network Cable

10BASE-T Ethernet:
2-pair UTP Cat. 3,4,5, Unshielded Twisted Pair (UTP) Cable
100BASE-TX Fast Ethernet:
4-pair UTP Cat. 5, Unshielded Twisted Pair (UTP) Cable
1000BASE-T Fast Ethernet:
4-pair UTP Cat. 5, Unshielded Twisted Pair (UTP) Cable
PoE port:
2-pair UTP Cat. 5, Unshielded Twisted Pair (UTP) Cable
MAC Address Table: 4K entries

LED Indicators

Diagnostic LEDs
Per Unit : Power, System ( 2 LEDs )
Per port : TX: Link/Activity, Speed ( 2 LEDs )
PoE : PoE Status (port 1 ~ port 24) (bi-color LED)

Management

Protocols

CSMA/CD

Topology

Star

Performance

Network Data Transfer Rate

Ethernet:
10Mbps (Half-duplex)
20Mbps (Full-duplex)
Fast Ethernet:
100Mbps (Half-duplex)
200Mbps (Full-duplex)
Fast Ethernet:
2000Mbps (Full-duplex)

Data RAM Buffers:

3Mbits per device

Filtering Address Table

8K Mac address table

Power Requirements

Power Supply

100 - 240VAC 50/60Hz, Internal universal switching power supply

PoE (Power over Ethernet)

PoE Budget: Up to 15.4Watts per PoE port
PoE Wiring: Power over pins 1,2,3,6
Supports PD classification
Supports PoE over current protection
Supports PoE circuit protection

Power Consumption

180 watts (max. with 11 x 15.4Watts powered devices connected)

Mechanical

Dimensions

440 mm (W) x 310 mm (H) x 44mm (D)

Environmental

Temperature

Operating: 0 ~ 40 O°C
Storage: -10 ~ 70 O°C

Humidity

Operating: 10% ~ 90% RH
Storage: 5% ~ 90% RH

Regulatory Approvals

EMI

FCC Class A
CE mark Class A
VCCI Class A

Safety

cUL (UL 60950)
CB(IEC 60950)

Retour en haut de page

Fourniture JetNet 4724G

JetNet 4724G 24-Port PoE 10/100Mbps + 2-Gigabit-Port Web Smart Ethernet Switch includes:

24-Port PoE 10/100Mbps + 2-Gigabit-Port Web Smart Ethernet Switch
Documentation CD-ROM

Retour en haut de page

JetNet 3705

Industrial 5-port Power Over Ethernet Switch

JetNet 4005f Industrial 5-Port Web-Managed Ethernet Switch

Four 10/100 TX Ports with Embedded PoE Injector
One 10/100FX Up-link Port
15.4W Full Power Delivery per PoE Port
Relay Alarm for Port Failure
Terminal Block Power Input for Industrial Application.
DC Jack Power Input for External Power Adapter
End-Point PoE Architecture
Easy Configuration by DIP Switch
DIN-Rail/ Wall-mounting and Desktop Installation

Généralité

Caractéristiques

Fourniture

Retour en haut de page

Généralité JetNet 3705

Industrial PoE switches that deliver power over UTP or STP cable not only save significant cost and space, but also increase power utilization and centralize power management. The JetNet 3705 equips with 4 PoE injector switch ports, with each port delivering power up to 15.4 watts in maximum,and one 10/100Base TX Up-link port transfering data to the remote end. The JetNet 3705 conforms to IEEE 802.3af Power over Ethernet (PoE) standard. The Power Over Ethernet technology can power up PoE enabled powered devices in full capability, e.g. IP surveillance camera, wireless Access Point, VoIP phone set, POS system, industrial sensors, controllers and security card reader. Using an external 48VDC power supply, JetNet 3705 enables power and data transmission to be pumped out over the same UTP or STP cable in the four PoE ports.

To meet the requirements for harsh environment, JetNet 3705 uses a robust aluminum case, offering IP30 protection, and supports one alarm relay output . The JetNet3705 provides standard industrial terminal block for the power and relay alarm contact output to alarm any port break or power failure. For the user's convenience, it also provides a DC jack for the traditional AC/DC power adapter.

Industrial-grade IEEE 802.3af Compliant Power Source Switch
JetNet3705 is in compliance with IEEE 802.3af standard and supports Power Sourcing Equipment (PSE) function. It delivers power through the spare pairs (4, 5, 7, 8) of standard Ethernet CAT5 cable and transmits data through the traditional pairs (1, 2, 3, 6). The JetNet3705 PoE ports provide PoE auto detection of the link partner to deliver the exact power to the PD. If the link partner is not a PD or the link cable is short, or the device is broken, it will executes a series of standard procedures to avoid sending out a huge power to damage the linked device.

Secure Power Protection
JetNet 3705 is designed to endure harsh working environment and severe operating temperature. To successfully deliver reliable power, JetNet 3705 builds in strong protection againest abnormal working conditions including 2KV power surge protection from the power input and over-voltage protection to keep PoE output voltage in between DC 44 ~ 57V, 350mA over-load current and 450 mA short current protection. The JetNet3705 PoE function is fully in compliant with IEEE 802.3af standard, therefore?all PoE protection measures are put into practice in the JetNet3705 series.

Retour en haut de page

Caractéristiques JetNet 3705

Technology

Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power Over Ethernet

Processing

Store and Forward architecture

Interface

Number of Ports

5 x RJ-45 for 10/100 Base-TX, Auto MDI/MDI-X

Network Cable

10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m)

LED Indicators

Power x 3 (Green), Fault x 1(Red)
PoE x 4(Green)
Link/Activity x 5 (Green on / Green Blinking)@100Mbps, (Yellow on / Yellow Blinking)@10Mbps

Alarm:

Dry Relay output for port and power event alert.

Performance

Transfer Rate

14,880 pps for Ethernet
148,800 pps for Fast Ethernet

Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512Kbits

Back-plane

3.2Gbps

Power Requirements

Power Supply

Input Voltage:
48VDC or -48VDC, dual inputs in terminal block connection
AC /DC Power Adapter 48VDC/ 1.6A (option)
Power input connector:
Two Power inputs via the Terminal Block (12 ~24 AWG power cable)
One DC jack for AC/D power adapter.
Reverse Polarity Protection: Present

Power Consumption

6.5Watts without PD loading
70Watts with PD full loading

PoEPort

Port 1~4
Per port 15.4W ability.
RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8)

PoE Ports Output Voltage

44 to 57VDC

DIP Switch

Switch 1~5: Port 1~5 link down alarm Enable/Disable
Switch 6: Power fault alarm Enable/Disable.

Mechanical

Installation

DIN-rail kit and wall mounting

Casing

IP-30 protection, Aluminum case, Fanless design

Dimensions

33.8 mm (H) x 164.8 mm(W) x 108 mm (D)

Environmental

Operating Temperature

General model: -10°C~70°C (14°F ~ 158°F)
Wide Operating Temp Model (-w): -40°C ~80°C (-40°F~176°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃ (-40 to 185°F)

Regulatory Approvals

EMI

FCC Class A, EN55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11

Safety

UL, cUL, EN 60950

Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Warranty

Global 5 years

Retour en haut de page

Fourniture JetNet 3705

JetNet 3705 Industrial 5-port PoE Power Source Ethernet Switch includes:

4 x 10/100 Base-TX PoE Port, 1 x 10/100 Base TX
Quick Installation Guide
Documentation CD-ROM
DIN-Rail mounting kit

Retour en haut de page

JetNet 3705f

Industrial 5-port Power Over Ethernet Switch

JetNet 4008 Industrial 8-Port Web-Managed Ethernet Switch

Four 10/100 TX Ports with Embedded PoE Injector
One 10/100FX Up-link Single-Mode / Multi-Mode Fiber Port
15.4W Full Power Delivery per PoE Port
Relay Alarm for Port Failure
Terminal Block Power Input for Industrial Application.
DC Jack Power Input for External Power Adapter
End-Point PoE Architecture
Easy Configuration by DIP Switch
DIN-Rail/ Wall-mounting and Desktop Installation

Généralité

Caractéristiques

Fourniture

Retour en haut de page

Généralité JetNet 3705f

Industrial PoE switches that deliver power over UTP or STP cable not only save significant cost and space, but also increase power utilization and centralize power management. The JetNet 3705f equips with 4 PoE injector switch ports, with each port delivering power up to 15.4 watts in maximum, and one 10/100Base fiber Up-link port transfering data to the remote end. The JetNet 3705f conforms to IEEE 802.3af Power over Ethernet (PoE) standard. The Power Over Ethernet technology can power up PoE enabled powered devices in full capability, e.g. IP surveillance camera, wireless Access Point, VoIP phone set, POS system, industrial sensors, controllers and security card reader. Using an external 48VDC power supply, JetNet 3705f enables power and data transmission to be pumped out over the same UTP or STP cable in the four PoE ports.

To meet the requirements for harsh environment, JetNet 3705f uses a robust aluminum case, offering IP30 protection, and supports one alarm relay output . The JetNet3705f provides standard industrial terminal block for the power and relay alarm contact output to alarm any port break or power failure. For the user's convenience, it also provides a DC jack for the traditional AC/DC power adapter.

Industrial-grade IEEE 802.3af Compliant Power Source Switch
JetNet3705f is in compliance with IEEE 802.3af standard and supports Power Sourcing Equipment (PSE) function. It delivers power through the spare pairs (4, 5, 7, 8) of standard Ethernet CAT5 cable and transmits data through the traditional pairs (1, 2, 3, 6). The JetNet3705f PoE ports provide PoE auto detection of the link partner to deliver the exact power to the PD. If the link partner is not a PD or the link cable is short, or the device is broken, it will executes a series of standard procedures to avoid sending out a huge power to damage the linked device.

Secure Power Protection
JetNet 3705f is designed to endure harsh working environment and severe operating temperature. To successfully deliver reliable power, JetNet 3705f builds in strong protection againest abnormal working conditions including 2KV power surge protection from the power input and over-voltage protection to keep PoE output voltage in between DC 44 ~ 57V, 350mA over-load current and 450 mA short current protection. The JetNet3705f PoE function is fully in compliant with IEEE 802.3af standard, therefore all PoE protection measures are put into practice in the JetNet3705 series.

Retour en haut de page

Caractéristiques JetNet 3705f

Technology

Standard

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet Fiber
IEEE802.3x Flow Control and Back-pressure
IEEE 802.3af Power over Ethernet

Processing

Store and Forward architecture

Interface

Number of Ports

4 x 10/100 Base-TX, Auto MDI/MDI-X, 1 x 100 Base-FX

Network Cable

10Base-T: 4-pair UTP/STP Cat. 3, 4, 5 cable, EIA/TIA-568 100-ohm(100m)
100Base-TX: 4-pair UTP/STP Cat. 5 cable, EIA/TIA-568 100-ohm(100m)

Optical Cable:

SC(Multi Mode): 50/125um or 62.5/125um
SC(Single Mode): 9/125um
Wavelength: 1310nm(Multi mode/ Single mode)
Available distance: 2km(Multi-mode)/ 30km(Single mode)
Min. TX power: -19 dBm(Multi-mode)/ -15 dBm(Single mode)
Max. TX power: -14 dBm(Multi-mode)/ -8 dBm(Single mode)
Sensitivity: -31 dBm(Multi-mode)/ -34 dBm(Single mode)

LED Indicators

Power x 3 (Green), Fault x 1(Red)
PoE x 4(Green)
Link/Activity x 5 (Green on / Green Blinking)@100Mbps, (Yellow on / Yellow Blinking)@10Mbps

Alarm:

Dry Relay output for port break and power fault

Performance

Transfer Rate

14,880 pps for Ethernet
148,800 pps for Fast Ethernet

Transfer packet size

64 bytes to 1522 bytes (with VLAN tag)

MAC Address

1K MAC address table

Memory Buffer

512Kbits

Back-plane

3.2 Gbps

Power Requirements

Power Supply

Power Consumption:

6.5Watts without PD loading
70Watts with PD full loading

PoEPort :

Port 1~4
RJ-45 pin assignment: TX (3,6), RX (1,2), V+ (4,5), V-(7,8)

PoE Ports Output Voltage:

44 to 57VDC

DIP Switch:

Switch 1~5: Port 1~5 link down alarm Enable/Disable
Switch 6: Power fault alarm Enable/Disable.

Mechanical

Installation

DIN-rail kit and wall mounting

Casing

IP-30 protection, Aluminum case, Fanless design

Dimensions

33.8 mm (H) x 164.8 mm(W) x 108 mm (D)

Environmental

Operating Temperature

General model: -10°C~70°C (14°F ~ 158°F)
Wide Operating Temp Model (-w): -40°C ~80°C (-40°F~176°F)

Operating Humidity

5% to 95% (Non-condensing)

Storage Temperature

-40 to 85℃ (-40 to 185°F)

Regulatory Approvals

EMI

FCC Class A, EN55022 Class A

EMC

EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
EN61000-4-6, EN61000-4-8, EN61000-4-11

Safety

UL, cUL, EN 60950

Shock

IEC 60068-2-27

Free Fall

IEC 60068-2-32

Vibration

IEC 60068-2-6

Warranty

Global 5 years

Retour en haut de page

Fourniture JetNet 3705f

JetNet 3705f-m Industria 5-port l PoE Power Source Ethernet Switch with one Multi-Mode 100Base-Fx includes:

4 x 10/100 Base-TX PoE Port, 1 x Multi-Mode 100 Base-FX Switch
Quick Installation Guide
Documentation CD-ROM
DIN-Rail mounting kit

JetNet 3705f-s 5-port Industrial PoE Power Source Ethernet Switch with one Single-Mode 100Base-Fx includes:

4 x 10/100 Base-TX PoE Port, 1 x Single Mode 100 Base-FX Switch
Quick Installation Guide
Documentation CD-ROM
DIN-Rail mounting kit

Retour en haut de page

	A Propos de ... \| Carte du Site \| Infos légales \| Nous Contacter \|
©2007 RESoluCOM^®, Site développé par P Jeannette.	Retour en haut de page

Commutateurs (Switch) industriels Ethernet

JetNet Série 3700

JetNet 4724G

JetNet 3705f